Jaguar V LX Y motor error fix

Apr 24, 2026

As you can see in this video the GCC Jaguar V LX has a y axis error and as a result you will see error symptoms as seen in the video.

Watch the error example video

 Here is the fix as follows

 perform a motor swap test on the machine to check if the issue relates to the motor or Driver board. 
 
Both the X and Y axis on the machine use the same motors. Please see the video and troubleshooting prompt below. 
 
Motor removal/installation video : youtube.com/watch?v=56x14AQlPhs&feature=youtu.be
 
 Perform a motor swap test on the machine to check if the issue relates to the motor or Driver board. 
 
If you swap the motors and the error message is now appearing on the  X axis (motor that moves the material back and forth)  that is an indication of a bad motor and it will need to be replaced.
 
 If the issue is still on the Y-axis (The motor that moves the carriage left and right)  or the same motor that you received an error message  then it would be an issue with the driver board of the machine.
 
If you have questions please reach out any time

 

Previous